Training Center - Course Registration

24 HOUR ICRA FOR OCCUPIED FACILITIES-WORKER

IS A 24-HOUR COURSE DESIGNED FOR INDIVIDUALS WORKING IN OCCUPIED FACILITIES PERFORMING CONSTRUCTION TASKS AND HAVE THE RESPONSIBILITY FOR THE BUILDING, MAINTENANCE, AND DECONSTRUCTION OF STRUCTURES AND CONTROLS OF WORK AREA CONTAINMENT. THE COURSE PROVIDES AN AWARENESS OF THE CAUSES FOR SECONDARY INFECTION, THE IMPORTANCE OF INFECTION CONTROL, AND PROCEDURES FOR PROPERLY CONDUCTING CONSTRUCTION ACTIVITIES WITHIN AN OCCUPIED HEALTHCARE FACILITY.

40 HR HAZARDOUS WASTE WORKER COURSE

THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY. HEALTH & SAFETY INFORMATION, HAZARD RECOGNITION, ENGINEERING CONTROLS, PERSONAL PROTECTIVE EQUIPMENT. SITE SAFETY PLANS, DECONTAMINATION PROCEDURES, SAFE USE OF FIELD EQUIPMENT, SAMPLING TECHNIQUES, RIGHTS AND RESPONSIBILITIES OF A WORKER, EMERGENCY PROCEDURES, MEDICAL SURVEILLANCE, CONFINED SPACE, UNDERGROUND STORAGE TANKS, EPA REGULATIONS, PRINCIPLES OF TOXICOLOGY. YOU MUST TAKE A HAZARDOUS WASTE WORKER REFRESHER EVERY YEAR PRIOR TO YOUR EXPIRATION DATE.

BASIC TRANSIT & LEVEL

THIS IS AN 80-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR TWO WEEKS. TRANSIT, BUILDERS LEVEL, GRADE ROD, RANGE POLES, SET UP AND OPERATION, APPLICATIONS FIELD EXERCISE, ELEVATIONS, STAKES, AND CONSTRUCTION

CONCRETE WORKER - PRACTICES AND PROCEDURES

PREVIOUSLY NAMED BASIC CONCRETE CONSTRUCTION THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY. BASIC CONSTRUCTION MATHEMATICS, MEASURING, LEVELING, SQUARING METHODS, FORM SYSTEMS, PLACEMENT, VIBRATION, STRIPPING, CLEANING, SITE SAFETY, HAND/POWER TOOLS, FIELD PROJECT TO INCLUDE: PLACING CONCRETE, TOOL AND EQUIPMENT MAINTENANCE. YOU MUST TAKE THIS COURSE PRIOR TO TAKING DECORATIVE CONCRETE FINISHING. PREREQUISITE: YOU MUST TAKE THIS COURSE PRIOR TO TAKING DECORATIVE CONCRETE FINISHING.

CONSTRUCTION PLAN READING - BASIC BUILDING

PREVIOUSLY NAMED BLUEPRINT READING. THIS IS AN 80-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR TWO WEEKS. A TWO-WEEK COURSE ON SKILLS NEEDED TO READ BLUEPRINTS IN THE AREAS OF PIPE, BUILDING SITE, AND ROAD WORK. THE STUDENTS WILL ALSO LEARN TO FIGURE QUANTITIES AND LAYOUT. PREREQUISITE: YOU MUST TAKE THE BASIC TRANSIT & LEVEL COURSE PRIOR TO TAKING THE BLUEPRINT READING COURSE.

ENTRY LEVEL DRIVER TRAINING CDL

YOU WILL BE RECEIVING A CLASS A WITH MANUAL RESTRICTION AND KINGPIN/5TH WHEEL RESTRICTION. FEDERAL MOTOR CARRIERS’ SAFETY ADMINISTRATION, ENTRY LEVEL DRIVER TRAINING COURSE TO OBTAIN YOUR CDL YOU WILL FIRST NEED TO GET A COMMERCIAL LEARNERS PERMIT (CLP) THROUGH THE STATE OF WISCONSIN AND MEET ALL CRITERIA SET FORTH BY THE FMCSA AND THE STATE OF WISCONSIN. YOU MUST HAVE A VALID STATE OF WISCONSIN DRIVER’S LICENSE AND HAVE ONLY ONE DRIVER'S LICENSE (YOU CANNOT HOLD AN OUT OF STATE LICENSE), BE ABLE TO READ, WRITE, AND SPEAK THE ENGLISH LANGUAGE WELL ENOUGH TO 1. SPEAK WITH THE GENERAL PUBLIC 2. UNDERSTAND HIGHWAY TRAFFIC SIGNALS 3. RESPOND TO OFFICIAL INQUIRIES 4. MAKE ENTRIES ON REPORTS AND RECORDS YOU MUST HAVE A FEDERAL MEDICAL EXAM WHICH INCLUDES DRUG AND ALCOHOL SCREENING AND BE REGISTERED ON THE FMCSA DRUG AND ALCOHOL CLEARING HOUSE REGISTRY PRIOR TO ATTENDING THIS COURSE.

FIRST AID INCLUDING CPR

FIRST AID/CPR/AED

THIS IS A ONE DAY COURSE. YOU WILL LEARN HOW TO RESPOND TO SPECIFIC SITUATIONS, WHICH WILL HELP YOU CARE FOR PEOPLE IN CRISIS AS THEY WAIT FOR MEDICAL PROFESSIONALS TO ARRIVE. YOU MUST TAKE A REFRESHER EVERY 2 YEARS IN ORDER TO STAY CURRENT.

GENERAL CONSTRUCTION WORKER

THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR ONE WEEK. INTRODUCTION TO THE CONSTRUCTION INDUSTRY WITH REGARDS TO SAFETY AND PROPER TECHNIQUES. TOOL RECOGNITION AND USAGE.

HAZARDOUS WASTE WORKER REFRESHER

THIS IS AN 8-HOUR REFRESHER COURSE. IN ORDER TO KEEP YOUR CARD CURRENT, YOU MUST TAKE A REFRESHER EVERY YEAR. YOU WILL HAVE A ONE WEEK GRACE PERIOD AFTER YOUR CARD EXPIRES TO STILL REFRESH YOUR CARD. IF YOU DO NOT REFRESH YOUR CARD BY THAT DATE YOUR CARD IS NO LONGER GOOD AND YOU WILL NEED TO TAKE THE 40-HOUR COURSE OVER IN ORDER TO OBTAIN A CARD. PREREQUISITE: YOU MUST HAVE A CURRENT HAZARDOUS WASTE WORKER CARD OBTAINED BY THE WI. LABORERS' APPRENTICESHIP & TRAINING FUND.

HOISTING RIGGING AND HAND SIGNAL

THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR ONE WEEK. A COURSE DESIGNED FOR PEOPLE WITH LITTLE OR NO EXPERIENCE WITH RIGGING AND HAND SIGNALS FOR CRANES.

OSHA 30-HOUR

THIS IS A 30-HOUR COURSE AND WILL BE HELD MONDAY - THURSDAY FOR 4 DAYS. THE 30-HOUR CONSTRUCTION OUTREACH TRAINING PROGRAM IS INTENDED TO PROVIDE A VARIETY OF TRAINING TO WORKERS WITH SAFETY RESPONSIBILITY. WORKERS MUST RECEIVE ADDITIONAL TRAINING ON HAZARDS SPECIFIC TO THEIR JOB. TRAINING WILL EMPHASIZE HAZARD IDENTIFICATION, AVOIDANCE, CONTROL AND PREVENTION, OF OSHA STANDARDS. INSTRUCTIONAL TIME MUST BE A MINIMUM OF 30 HOURS. OSHA SUBPART REFERENCES ARE PROVIDED FOR INFORMATIONAL PURPOSES; TRAINING WILL EMPHASIZE HAZARD AWARENESS.

OSHA, 30-HOUR

THIS IS A 30-HOUR COURSE AND WILL BE HELD MONDAY - THURSDAY FOR 4 DAYS. THE 30-HOUR CONSTRUCTION OUTREACH TRAINING PROGRAM IS INTENDED TO PROVIDE A VARIETY OF TRAINING TO WORKERS WITH SAFETY RESPONSIBILITY. WORKERS MUST RECEIVE ADDITIONAL TRAINING ON HAZARDS SPECIFIC TO THEIR JOB. TRAINING WILL EMPHASIZE HAZARD IDENTIFICATION, AVOIDANCE, CONTROL AND PREVENTION, OF OSHA STANDARDS. INSTRUCTIONAL TIME MUST BE A MINIMUM OF 30 HOURS. OSHA SUBPART REFERENCES ARE PROVIDED FOR INFORMATIONAL PURPOSES; TRAINING WILL EMPHASIZE HAZARD AWARENESS.

ROUGH TERRAIN FORKLIFT OPERATION

THIS IS A ONE DAY COURSE. THIS COURSE IS FOR INDIVIDUALS WHO NEED TRAINING TO OPERATE A ROUGH TERRAIN FORKLIFT ON A CONSTRUCTION JOB SITE. DURING TRAINING, PARTICIPANTS LEARN TO PROPERLY AND SAFELY INSPECT, OPERATE, AND MAINTAIN THE FORKLIFT. LIUNA’S COURSE HELPS WORKERS UNDERSTAND THE RTF’S CAPABILITIES AND TEACHES THEM SAFETY PRECAUTIONS THAT WILL MAKE THEM BETTER OPERATORS. PARTICIPANTS MUST PASS BOTH A WRITTEN AND A PERFORMANCE ASSESSMENT TO SUCCESSFULLY COMPLETE THE TRAINING AND RECEIVE THEIR RTF CERTIFICATE. YOU MUST TAKE A REFRESHER EVERY THREE YEARS IN ORDER TO STAY CURRENT. IF YOU GO PAST YOUR EXPIRATION DATE YOU WILL NEED TO ATTEND THIS FULL COURSE OVER AND NOT JUST THE REFRESHER. FORKLIFT SAFETY, OPERATION AND MAINTENANCE.

SCAFFOLD BUILDER

THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR ONE WEEK. THE COURSE COMPLIES WITH OSHA REGULATIONS 1926. 450-454. THE CURRICULUM INCLUDES THE OSHA STANDARDS, FALL PROTECTION, STAIRWAYS AND LADDERS, ELECTRICAL HAZARDS AND LOADING OF SCAFFOLD. HANDS-ON TRAINING ON THE SCAFFOLD SYSTEMS INCLUDE FRAME & BRACE, TUBE & CLAMP; TOWER SCAFFOLDS AND ROLLING TOWER.

SMALL GAS ENGINE - OPERATION/MAINTENANCE/REPAIR

THIS IS A 16-HOUR COURSE. HANDS ON TRAINING, DEMONSTRATIONS, GAS/OIL RATIOS, ENGINE MAINTENANCE AND REPAIR.

TRAFFIC CONTROL AND FLAGGING

TRAFFIC CONTROL AND FLAGGING - 1 DAY CONTROLLING TRAFFIC THROUGH WORK AREAS IS ONE OF THE MOST IMPORTANT AND DANGEROUS OPERATIONS IN CONSTRUCTION PROJECTS. THIS FLAGGER TRAINING COURSE IS A COMPREHENSIVE SKILL-BUILDING SESSION THAT MEETS FEDERAL INDUSTRY GUIDELINES, THE MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD) GUIDELINES. MUST REFRESH EVERY 2 YEARS.

WELDING & CUTTING

THIS IS AN 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR ONE WEEK. PERSONAL SAFETY, PROTECTIVE EQUIPMENT, GRINDING, AC-DC WELDING, CUTTING TORCHES, OXYGEN/ACETYLENE, FLAMEX FUEL, BRAZING, ARC WELD-HORIZONTAL/VERTICAL, FLAT, PIPE. *IF YOU WEAR CONTACTS PLEASE TAKE YOUR CONTACTS OUT BEFORE ATTENDING CLASS AS YOU WILL NOT BE ABLE TO WELD WITH CONTACTS IN.