Training Center - Course Registration
40 HR HAZARDOUS WASTE WORKER COURSE
THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY. HEALTH & SAFETY INFORMATION, HAZARD RECOGNITION, ENGINEERING CONTROLS, PERSONAL PROTECTIVE EQUIPMENT. SITE SAFETY PLANS, DECONTAMINATION PROCEDURES, SAFE USE OF FIELD EQUIPMENT, SAMPLING TECHNIQUES, RIGHTS AND RESPONSIBILITIES OF A WORKER, EMERGENCY PROCEDURES, MEDICAL SURVEILLANCE, CONFINED SPACE, UNDERGROUND STORAGE TANKS, EPA REGULATIONS, PRINCIPLES OF TOXICOLOGY. YOU MUST TAKE A HAZARDOUS WASTE WORKER REFRESHER EVERY YEAR PRIOR TO YOUR EXPIRATION DATE.
Course Number:
HAZ.W40
Course Type:
ENVIRONMENTAL
| Date | Location / Instructor | |
|---|---|---|
|
10/20/25 to 10/24/25 Class ID: 6871 |
WLTC MATT HUBER |
View details |
AERIAL SCISSOR LIFT
STUDENTS WILL LEARN HOW TO INSPECT AND SAFELY OPERATE A SCISSOR LIFT.
Course Number:
SALT
Course Type:
| Date | Location / Instructor | |
|---|---|---|
|
10/16/25 to 10/16/25 Class ID: 7126 |
WLTC JAMES KAETHER |
View details |
ASBESTOS ABATEMENT SUPERVISOR REFRESHER
**CONTACT THE TRAINING CENTER TO SCHEDULE YOUR REFRESHER DATE 608-846-5764 THIS IS AN 8-HOUR REFRESHER COURSE. IN ORDER TO KEEP YOUR CARD CURRENT, YOU MUST TAKE A REFRESHER EVERY YEAR. PREREQUISITE: YOU MUST HAVE A CURRENT ASBESTOS SUPERVISOR CARD
Course Number:
ASB.SR
Course Type:
ENVIRONMENTAL
| Date | Location / Instructor | |
|---|---|---|
|
04/21/26 to 04/21/26 Class ID: 6981 |
WLTC RANDALL TRANBERG |
View details |
BASIC TRANSIT & LEVEL
THIS IS AN 80-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR TWO WEEKS. TRANSIT, BUILDERS LEVEL, GRADE ROD, RANGE POLES, SET UP AND OPERATION, APPLICATIONS FIELD EXERCISE, ELEVATIONS, STAKES, AND CONSTRUCTION
Course Number:
LEV
Course Type:
BUILDING & COMMERCIAL/HEAVY & HIGHWAY/UTILITIES
| Date | Location / Instructor | |
|---|---|---|
|
10/20/25 to 10/31/25 Class ID: 6872 |
WLTC JAMES KAETHER |
View details |
|
03/23/26 to 04/03/26 Class ID: 6896 |
WLTC JAMES KAETHER |
View details |
CLP (COMMERCIAL LEARNERS PERMIT)
THE STATE OF WISCONSIN COMMERCIAL LEARNERS PERMIT IS REQUIRED TO ATTEND FMSCA ENTRY LEVEL DRIVER PROGRAM. THIS CLASS WILL PREPARE YOU TO PASS THE GENERAL KNOWLEDGE, AIR BRAKE, COMBINATION VEHICLE AND TANKER ENDORSEMENT WRITTEN TESTS FOR THE STATE OF WISCONSIN COMMERCIAL LEARNERS PERMIT, AS WELL AS TO MAKE SURE YOU MEET ALL OTHER QUALIFICATIONS. APPRENTICES SHOULD SEND RAY A PICTURE OF THEIR CDL PERMIT TO RECEIVE CREDIT FOR THE COURSE.
Course Number:
CDL.P
Course Type:
EDUCATIONAL/LIFE SKILLS
| Date | Location / Instructor | |
|---|---|---|
|
10/13/25 to 10/16/25 Class ID: 6868 |
WLTC WAYNE DARLING |
View details |
CONCRETE STAMPING
PREVIOUSLY NAMED DECORATIVE CONCRETE FINISHING THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR ONE WEEK. DECORATING CONCRETE WITH STAMPS, STENCILS, AND ACID STAINING. PREREQUISITE: YOU MUST TAKE THE BASIC CONCRETE CONSTRUCTION COURSE PRIOR TO TAKING THE DECORATIVE CONCRETE FINISHING COURSE.
Course Number:
CONCR.S
Course Type:
BUILDING & COMMERCIAL/HEAVY & HIGHWAY/UTILITIES
| Date | Location / Instructor | |
|---|---|---|
|
03/30/26 to 04/03/26 Class ID: 6917 |
WLTC ROBERT NEIS |
View details |
CONCRETE WORKER - PRACTICES AND PROCEDURES
PREVIOUSLY NAMED BASIC CONCRETE CONSTRUCTION THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY. BASIC CONSTRUCTION MATHEMATICS, MEASURING, LEVELING, SQUARING METHODS, FORM SYSTEMS, PLACEMENT, VIBRATION, STRIPPING, CLEANING, SITE SAFETY, HAND/POWER TOOLS, FIELD PROJECT TO INCLUDE: PLACING CONCRETE, TOOL AND EQUIPMENT MAINTENANCE. YOU MUST TAKE THIS COURSE PRIOR TO TAKING DECORATIVE CONCRETE FINISHING. PREREQUISITE: YOU MUST TAKE THIS COURSE PRIOR TO TAKING DECORATIVE CONCRETE FINISHING.
Course Number:
CONCR
Course Type:
BUILDING & COMMERCIAL/HEAVY & HIGHWAY/UTILITIES
| Date | Location / Instructor | |
|---|---|---|
|
10/20/25 to 10/24/25 Class ID: 6870 |
WLTC RANDALL TRANBERG |
View details |
ENTRY LEVEL DRIVER TRAINING CDL
YOU WILL BE RECEIVING A CLASS A WITH MANUAL RESTRICTION AND KINGPIN/5TH WHEEL RESTRICTION. FEDERAL MOTOR CARRIERS’ SAFETY ADMINISTRATION, ENTRY LEVEL DRIVER TRAINING COURSE TO OBTAIN YOUR CDL YOU WILL FIRST NEED TO GET A COMMERCIAL LEARNERS PERMIT (CLP) THROUGH THE STATE OF WISCONSIN AND MEET ALL CRITERIA SET FORTH BY THE FMCSA AND THE STATE OF WISCONSIN. YOU MUST TAKE YOUR AIR BRAKES, GENERAL KNOWLEDGE, AND COMBINATION TESTS. YOU MUST HAVE A VALID STATE OF WISCONSIN DRIVER’S LICENSE AND HAVE ONLY ONE DRIVER'S LICENSE (YOU CANNOT HOLD AN OUT OF STATE LICENSE), BE ABLE TO READ, WRITE, AND SPEAK THE ENGLISH LANGUAGE WELL ENOUGH TO 1. SPEAK WITH THE GENERAL PUBLIC 2. UNDERSTAND HIGHWAY TRAFFIC SIGNALS 3. RESPOND TO OFFICIAL INQUIRIES 4. MAKE ENTRIES ON REPORTS AND RECORDS YOU MUST HAVE A FEDERAL MEDICAL EXAM WHICH INCLUDES DRUG AND ALCOHOL SCREENING AND BE REGISTERED ON THE FMCSA DRUG AND ALCOHOL CLEARING HOUSE REGISTRY PRIOR TO ATTENDING THIS COURSE.
Course Number:
ELDT
Course Type:
EDUCATIONAL/LIFE SKILLS
| Date | Location / Instructor | |
|---|---|---|
|
10/20/25 to 11/07/25 Class ID: 6869 |
WLTC CRAIG ADLER |
View details |
|
03/30/26 to 04/16/26 Class ID: 7038 |
WLTC CRAIG ADLER |
View details |
GENERAL CONSTRUCTION WORKER
THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR ONE WEEK. INTRODUCTION TO THE CONSTRUCTION INDUSTRY WITH REGARDS TO SAFETY AND PROPER TECHNIQUES. TOOL RECOGNITION AND USAGE.
Course Number:
GENCON
Course Type:
BUILDING & COMMERCIAL/HEAVY & HIGHWAY/UTILITIES
| Date | Location / Instructor | |
|---|---|---|
|
10/27/25 to 10/31/25 Class ID: 6873 |
WLTC RANDALL TRANBERG |
View details |
GPS AND TOTAL STATION
PREREQUISITE: MINIMUM THE BASIC TRANSIT & LEVEL COURSE. WE WOULD PREFER YOU TO HAVE BOTH THE BASIC TRANSIT & LEVEL AND THE CONSTRUCTION PLAN READING. THIS COURSE TEACHES THE FUNDAMENTAL SKILLS EVERY WORKER WILL NEED TO BECOME PRODUCTIVE IN RTK GNSS USING EITHER A BASE/ROVER OR NETWORK CONFIGURATION AND TOTAL STATION. WE WILL COVER FEATURE MAPPING, LAYOUT, DATA COLLECTION, AND STAKEOUT.
Course Number:
TSGPS
Course Type:
| Date | Location / Instructor | |
|---|---|---|
|
04/06/26 to 04/09/26 Class ID: 6965 |
WLTC |
View details |
HAZARDOUS WASTE WORKER REFRESHER
THIS IS AN 8-HOUR REFRESHER COURSE. IN ORDER TO KEEP YOUR CARD CURRENT, YOU MUST TAKE A REFRESHER EVERY YEAR. YOU WILL HAVE A ONE WEEK GRACE PERIOD AFTER YOUR CARD EXPIRES TO STILL REFRESH YOUR CARD. IF YOU DO NOT REFRESH YOUR CARD BY THAT DATE YOUR CARD IS NO LONGER GOOD AND YOU WILL NEED TO TAKE THE 40-HOUR COURSE OVER IN ORDER TO OBTAIN A CARD. PREREQUISITE: YOU MUST HAVE A CURRENT HAZARDOUS WASTE WORKER CARD OBTAINED BY THE WI. LABORERS' APPRENTICESHIP & TRAINING FUND.
Course Number:
HAZ.R
Course Type:
ENVIRONMENTAL
| Date | Location / Instructor | |
|---|---|---|
|
04/20/26 to 04/20/26 Class ID: 6985 |
WLTC RANDALL TRANBERG |
View details |
HOISTING RIGGING AND HAND SIGNAL
THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR ONE WEEK. A COURSE DESIGNED FOR PEOPLE WITH LITTLE OR NO EXPERIENCE WITH RIGGING AND HAND SIGNALS FOR CRANES.
Course Number:
HOIST
Course Type:
BUILDING & COMMERCIAL/HEAVY & HIGHWAY/UTILITIES
| Date | Location / Instructor | |
|---|---|---|
|
10/13/25 to 10/17/25 Class ID: 6885 |
WLTC MATT HUBER |
View details |
OSHA 30-HOUR
THIS IS A 30-HOUR COURSE AND WILL BE HELD MONDAY - THURSDAY FOR 4 DAYS. THE 30-HOUR CONSTRUCTION OUTREACH TRAINING PROGRAM IS INTENDED TO PROVIDE A VARIETY OF TRAINING TO WORKERS WITH SAFETY RESPONSIBILITY. WORKERS MUST RECEIVE ADDITIONAL TRAINING ON HAZARDS SPECIFIC TO THEIR JOB. TRAINING WILL EMPHASIZE HAZARD IDENTIFICATION, AVOIDANCE, CONTROL AND PREVENTION, OF OSHA STANDARDS. INSTRUCTIONAL TIME MUST BE A MINIMUM OF 30 HOURS. OSHA SUBPART REFERENCES ARE PROVIDED FOR INFORMATIONAL PURPOSES; TRAINING WILL EMPHASIZE HAZARD AWARENESS.
Course Number:
OSHA30
Course Type:
SAFETY AND HEALTH
| Date | Location / Instructor | |
|---|---|---|
|
03/30/26 to 04/02/26 Class ID: 7020 |
WLTC WAYNE DARLING |
View details |
SCAFFOLD BUILDER
THIS IS A 40-HOUR COURSE AND WILL BE HELD MONDAY - FRIDAY FOR ONE WEEK. THE COURSE COMPLIES WITH OSHA REGULATIONS 1926. 450-454. THE CURRICULUM INCLUDES THE OSHA STANDARDS, FALL PROTECTION, STAIRWAYS AND LADDERS, ELECTRICAL HAZARDS AND LOADING OF SCAFFOLD. HANDS-ON TRAINING ON THE SCAFFOLD SYSTEMS INCLUDE FRAME & BRACE, TUBE & CLAMP; TOWER SCAFFOLDS AND ROLLING TOWER.
Course Number:
SCAF
Course Type:
BUILDING & COMMERCIAL/HEAVY & HIGHWAY/UTILITIES
| Date | Location / Instructor | |
|---|---|---|
|
10/13/25 to 10/17/25 Class ID: 6867 |
WLTC RANDALL TRANBERG |
View details |
COURSES
- 40 HR HAZARDOUS WASTE WORKER COURSE
- AERIAL SCISSOR LIFT
- ASBESTOS ABATEMENT SUPERVISOR REFRESHER
- BASIC TRANSIT & LEVEL
- CLP (COMMERCIAL LEARNERS PERMIT)
- CONCRETE STAMPING
- CONCRETE WORKER - PRACTICES AND PROCEDURES
- ENTRY LEVEL DRIVER TRAINING CDL
- GENERAL CONSTRUCTION WORKER
- GPS AND TOTAL STATION
- HAZARDOUS WASTE WORKER REFRESHER
- HOISTING RIGGING AND HAND SIGNAL
- OSHA 30-HOUR
- SCAFFOLD BUILDER